This guide explains how to install and set up VBOX Mini Pit Lane Timer for basic operation.
This guide explains how to install and set up VBOX Mini Pit Lane Timer for basic operation.
Typical kit includes:
- VBOX Mini Pit Lane Timer unit
- Power cable (vehicle supply)
- SD card
- GNSS antenna
- Mounting solution
Insert a FAT32-formatted SD card into the side of the unit. For reliable operation, use a Class 10 card or higher.
All logged data is recorded directly to the SD card.
Connect the supplied GNSS antenna to the antenna connector.
For best results:
- Mount the antenna on the vehicle roof
- Ensure a clear view of the sky
- Avoid mounting near roof bars or other metal objects
Correct antenna placement is important for reliable pit timing and speed measurements.
Connect the supplied power cable to the POWER connector on the unit and to a compatible 12 V vehicle power source.
The unit will power on automatically.
When powered on, the unit will:
- Search for satellites
- Detect the SD card
Mount the unit securely in a visible location using the supplied mount.
Use the arrow buttons to select the required display mode.
Available modes include:
- Pit Timing
- Speed Display
The selected mode determines the information shown on the display during use.
The unit will remember the previously used display mode after power cycling.
The system is ready when:
- Satellite lock has been acquired
- An SD card is inserted
- The required display mode has been selected
- Live data is visible on the display
If the unit cannot detect an SD card, it will display a No Media message while the vehicle is travelling at 5 mph or less.
Once set up:
- The unit is ready for basic use.
- Pit timing functions can be configured if required.
- The unit is ready to create pit timing log files.
You are now ready to begin driving.
When Pit Timing mode is active, press the OK button to start or stop pit time logging.
Pit timing logs are saved to the inserted SD card as text files.
IMPORTANT
Do not remove the SD card while logging is active as it may cause data loss or file corruption.
Always stop logging before removing the SD card.
Before using Pit Timing mode, additional configuration is required, including:
- Defining pit lane entry and exit gates
- Selecting a pit timing method
- Configuring pit lane timing parameters
See the User Guide for setup and operating instructions.